3″ Dewatering Pump for water removal.
Remove clean water from a job site or a swimming pool quickly with the PG 3 or PG 3A Dewatering pumps. This simplistic easy to use pump can remove water up to 264 gpm (1000L/min) containing little or no solids. Comes standard with a self-priming centrifugal action and is very compact in size. The 3″ Dewatering Pump is ideal for contractors with a need to remove water.
- Cast iron impellers and volutes are wear resistant for long life and reduced maintenance.
- Pump out vanes on back of impeller reduces debris accumulated and downtime for improved productivity.
- Carbon ceramic mechanical seal teamed with a reliable four-cycle engine with low oil shutdown provides for maximum operating life.
- High strength lightweight die cast aluminum housing increases pump life. A heavy duty protective frame duals as carrying handles while adding structural protection for the pump.
Product Information Sheet: PDF
PG 3 (SKU: 0009498 , ENGINE: WACKER NEUSON)
PG 3A (SKU: 0007659 , ENGINE: HONDA)
|PG 3||PG 3A|
|L x W x H in||20.2 x 15.9 x 18.2||20.2 x 15.9 x 18.2|
|L x W x H Shipping in||21.2 x 16.9 x 19.4||21.2 x 16.9 x 19.4|
|Diameter Suction and Discharge in||3||3|
|Operating weight lb||69||69|
|Shipping weight lb||75||75|
|Discharge Head ft||101||98|
|Flow rate US gpm||256||264|
|Suction height Lift ft||26||25|
|Solids diameter Max. Size in||0.25||0.25|
|Engine / Motor|
|Engine / Motor type||Air Cooled Single Cylinder||Air Cooled Single Cylinder|
|Engine / Motor manufacturer||Wacker Neuson||Honda|
|Engine / Motor||WM 170||GX160W1C2|
|RPM / speed Max. Engine rpm||4,000||3,600|
|RPM / speed Operating rpm||3,600||3,600|
|Power Max. Rated Power hp||5.7||4.8|
|Power Rating Specification||SAE J1349||SAE J1349|
|Engine oil Capacity US qt||0.63||0.63|
|Fuel consumption US gal/h||0.47||0.47|
|Tank capacity Fuel US qt||3.8||3.8|